50 Years Serving North America
Manufacturer Sales Agency

Address

869 Grenoble Blvd.,
Pickering, Ontario,
L1W 1T7 Canada

Call us

416-717-0516

John King

Call us

905-424-3740

Mark Romanelli

Address

869 Grenoble Blvd., Pickering, Ontario, L1W 1T7 Canada

Call us

416-717-0516

John King

Call us

905-424-3740

Mark Romanelli

General

Light Construction Equipment that’s Leading the Industry. General Equipment Company manufactures Hole Digging Equipment, Surface Preparation Products and Ventilation Blowers.

M357H Two Man Hole Diggers

The Comfort-Flex® composite operator handles flex under load to help absorb vibration and shock. Increase safety in the even of contact with an underground utility line. Heat-treated spur gears are precision machine-cut, deliver unequated torque and horsepower. All-metal centrifugal clutch, oil-cooled to extend life, and slips on overload or sudden contact with buried obstructions. Magura trist grip throttle control.

Power Source
Type: GXV160 Honda
Horse Power: 5.5HP
Starter: Hand rewind
Fuel: Gasoline, unleaded automotive grade

Portable Ventilation Blowers & Air Scrubbers

EP8 Portable Table Ventilation Blowers

Designed to accommodate most non hazardous confined space ventilation requirements. Built with heavy-gauge aluminum and steel construction. Applicable models certified by Canadian Standards Association (CSA). All units offer independent laboratory certified air flow rates. Less air duct unless included as a standard component.

Power Source
Type: 1/3 HP (23kw), 60Hz, 115 Volts, AC, Single Phase
RPM: 1725
Speed Control: Single Speed

NON-HAZARDOUS LOCATIONS

GP8H Radial Blower

Designed to accommodate most nonhazardous confined space ventilation requirements where the use of a gasoline engine isdesirable or required. Heavy duty, cast aluminum blower housing for exceptional resistance to damage. Convenient carry handlewhile on the jobsite. Cast impeller-type blower wheel delivers higher flow rates at increased static pressures. Spring mountedframe assembly reduces engine vibrations. Air flow rates are certified by an independent laboratory. Utilizes nonhazardouslocation-type ducts in 15 and 25 foot (4.6 and 7.4 m) lengths. Less ventilation duct.

EP8ACP Axial Blower

Designed with flexibility in mind, every feature of the EP8ACP Ventilation Blower is designed to meet the confined space ventilation demands for many construction, utility, and municipal applications. Straight thru, axial flow design maximizes air flow delivery rates with input horsepower. Sturdy, easy-grip handle molded directly into the housing makes for convenient, reliable transport. The tough, double-walled housing is molded from UV-resistant polyethylene, making it dent-resistant, corrosion-proof and virtually indestructible. A ir flows rates are certified by an independent testing agency.

EP12ACP Non-Hazardous Air Ventilation Blower

Designed with flexibility in mind, every feature of the EP12ACP Ventilation Blower is designed to meet the confined space ventilation demands for many construction, utility, and municipal applications. Straight thru, axial flow design maximizes air flow delivery rates with input horsepower. Sturdy, easy-grip handle molded directly into the housing makes for convenient, reliable transport. The tough, double-walled housing is molded from UV-resistant polyethylene, making it dent-resistant, corrosion-proof and virtually indestructible. Air flows rates are certified by an independent testing agency.

EP16ACP Non-Hazardous Air Ventilation Blower

Designed with flexibility in mind, every feature of the EP16ACP Ventilation Blower is designed to meet the confined space ventilation demands for many construction, utility, and municipal applications from spot cooling to fume exhausting fumes. Straight thru, axial flow design maximizes air flow delivery rates with input horsepower. Sturdy, easy-grip handle molded directly into the housing makes for convenient, reliable transport. The tough, double-walled housing is molded from UV-resistant high density polyethylene, making it dent-resistant, corrosion-proof and virtually indestructible.

EP20ACP

Use the EP20ACP Ventilation Blower for both vertical and horizontal air flow movement job applications including carpets, subfloors, cabinets, closets, ceilings, attic areas and damaged drywall,

Dry an entire room in just a matter of a minutes and not hours. Use it to effectively dry an entire room quickly and easily by using standard and accepted air movement principles. The multi -bladed propeller draws in warmer and less humid air from above, forces it down at high velocity and disperses it across the entire floor as a fast and effective drying solution. The effect is a vertically oriented convection pattern that helps maximize water absorption and the heat transfer necessary to dry floor surfaces.

The boxed-type design gives the EP20ACP added versatility when placed in a horizontal configuration. Position it within a work area to create a horizontal convection air flow pattern to cool personnel or dilute the effects of contaminated air.

CDP10P Carpet Dryer

The CD10P Carpet Dryer is a powerful and efficient way move air to accelerate evaporation rates for drying carpets, hardwood floors, flooded areas, and general air circulation requirements. For minor flooding events in the home or office, quick drying with a dryer is the best defense against the formation of mold and mildew. Can be aimed horizontally, vertically or at a 45° angle to maximize convection patterns. A three speed electric motor varies air flow rates to meet almost every job requirement. The low 72 dB noise level makes it the ideal solution for drying entryway mats in wet weather, hallway corridors during normal maintenance or any area that is noise sensitive. Carry handle is balanced for easy transport. This blower is powerful, durable and lightweight.

AF501 HEPA Filter Portable Air Scrubber

The Model AF501 AIR -SCRUB-RTM provides a compact, portable, HEPA filtration solution delivering air scrubbing/negative pressure air movement capabilities. Its two-stage design features a pre-filter and a high efficiency HEPA filter for outstanding air filtration in a wide range of industrial and construction related job applications. An optional activated carbon filter can replace the standard pre -filter to help absorb a wide range of volatile organic compounds (VOCs), smoke, plus other noxious odors and contaminants. A clean filter indicator light tells the operator when to change the filter to maintain optimum airflow and filtration.

The unit comes with a variable speed motor for adjustable airflow rates up to 500 CFM. Capable of daisy-chaining multiple units together on a single circuit using the integral GFCI outlet and 12 Ampere breaker. In addition, the AF501 offers a 9.5 inch diameter inlet for maximum airflow, low power consumption and easy attachment of standard ventilation ducts for negative/evacuation air flow applications.

Flexible Duct – Duc Pac

Designed to accommodate most nonhazardous confined space ventilation requirements where the use of a gasoline engine is desirable or required. Heavy duty, cast aluminum blower housing for exceptional resistance to damage. Convenient carry handle while on the job site. Cast impeller-type blower wheel delivers higher flow rates at increased static pressures. Spring mounted frame assembly reduces engine vibrations. Air flow rates are certified by an independent laboratory. Utilizes non hazardous location-type ducts in 15 and 25 foot (4.6 and 7.4 m) lengths. Less ventilation duct.

AF501 Air SCRUB-R Portable HEPA Air Filter

The Model AF501 AIR -SCRUB-RTM provides a compact, portable, HEPA filtration solution delivering air scrubbing/negative pressure air movement capabilities. Its two-stage design features a pre-filter and a high efficiency HEPA filter for outstanding air filtration in a wide range of industrial and construction related job applications. An optional activated carbon filter can replace the standard pre -filter to help absorb a wide range of volatile organic compounds (VOCs), smoke, plus other noxious odors and contaminants. A clean filter indicator light tells the operator when to change the filter to maintain optimum airflow and filtration.

The unit comes with a variable speed motor for adjustable airflow rates up to 500 CFM. Capable of daisy-chaining multiple units together on a single circuit using the integral GFCI outlet and 12 Ampere breaker. In addition, the AF501 offers a 9.5 inch diameter inlet for maximum airflow, low power consumption and easy attachment of standard ventilation ducts for negative/evacuation air flow applications.

Non-Hazardous Location Accessories

Duct Couplers

For use on the Non-hazardous Series Blower Ducts.

Allows two lengths of 8 inch nominal diameter flexible duct to be attached together with clamps. Heavy duty, 24 gauge, galvanized or stainless steel construction. For use in non-hazardous locations only. Increased duct length can substantially reduce air flow rate.

Duct Types

For use on the Non-Hazardous Series Blowers.

DUC-PAC™ 8 inch nominal diameter x 15 foot length, vinyl coated, synthetic fabric construction; wire helix reinforcement with anti-scuff strip; nylon ring and securing strap on opposite ends Complete with integral storage bag.

Dust Collection Bags

The DB Series Dust Collection Bag is an easy and cost effective way to perform dust extraction at the source. Whether you’re talking about drilling, sawing, sanding, chopping or dust generated by sweeping and brushing that may create a dust compliance issue, the Dust Collection Bag is an effective solution for reducing airborne dust exposure. Intended to be used in conjunction with confined space ventilation blowers by simply attaching to the outlet side of the blower and turning the blower on. Easy to use and can be cleaned for reuse. The bag material provides 85% filtration efficiency with the bag intended to control silica dust and other non-combustible dusts or particulate-type materials created as a byproduct in construction related applications/activities. Helps address OSHA 29CFR 1926.1159 dust regulations in addition to safeguarding worker health. It is not intended for other stated purposes, including use for asbestos abatement and mold remediation. Ventilation blowers ordered separately.

HAZARDOUS LOCATIONS

EP8HL Hazardous Location Air Ventilation Blower

Designed to accommodate most hazardous confined space ventilation requirements as defined by the National Electric Code.Heavy-duty, cast aluminum blower housing for exceptional resistance to damage. Convenient carry handle while on the jobsite. Stamped steel type blower wheel delivers high flow rates. Welded, heavy-gauge, aluminum-frame construction. The EP8HL is certified for use in Class II, Group D; Class II, Group G and Class III hazardous locations as defined by the National Electic Code. Air flow rates are certified by an independent laboratory. Utilizes only special, hazardous location type, conductive ducts in 15 and 25 foot (4.6 and 7.4 m) lengths. Less ventilation duct.

SURFACE PREPARATION & DUST COLLECTION SYSTEMS

SG24/GH Gasoline Dual Head Surface Grinders

Welded, unitized frame. Dual counter rotating multi-accessory discs with elastomeric-type gimbal heads; twin V-belt and spur gear reduction system; adjustable operator handle and wheel heights; 3 inch diameter vacuum attachment port. Include safety and dust shield assembly kit.

Power Source
Type: Honda, GXV340, 4-Cycle gasoline engine
RPM: 3600
Horse Power: 11HP (82kw)
Starting Method: Mechanical rewind.

PLANERS

SP8E5HP50 ELECTRIC SURFACE PLANER

Designed for a wide range of concrete removal, repair or restoration job applications. The exclusive drum forward configuration was specifically designed for sidewalk trip and fall type removal projects. Welded, unitized frame construction with full length, hexagon driveshaft for maximum power transmission to the flail drum. Extra capacity, ball bearings are externally greased to extend their service life. The Quik-Pitch™ lever/drum engagement system features a separate, fine adjustment for precise control. Standard 8 inch (203 mm) drum width and 5/8 inch (16 mm) maximum cutting depth. An industry standard 3 inch (76 mm) diameter dust collection port is provided for use with appropriate industrial type, dust control systems. Includes one drum, less flail kit.

SP8GH9HP GASOLINE SURFACE PLANER

Designed for a wide range of concrete removal, repair or restoration job applications. The exclusive drum forward configuration was specifically designed for sidewalk trip and fall type removal projects. Welded, unitized frame construction with full length, hexagon driveshaft for maximum power transmission to the flail drum. Extra capacity, ball bearings are externally greased to extend their service life. The Quik-Pitch™ lever/drum engagement system features a separate, fine adjustment for precise control. Standard 8 inch (203 mm) drum width and 5/8 inch (16 mm) maximum cutting depth. An industry standard 3 inch (76 mm) diameter dust collection port is provided for use with appropriate industrial type, dust control systems. Includes one drum, less flail kit.

SP8E5HP60 ELECTRIC SURFACE PLANER

Designed for a wide range of concrete removal, repair or restoration job applications. The exclusive drum forward configuration was specifically designed for sidewalk trip and fall type removal projects. Welded, unitized frame construction with full length, hexagon driveshaft for maximum power transmission to the flail drum. Extra capacity, ball bearings are externally greased to extend their service life. The Quik-Pitch™ lever/drum engagement system features a separate, fine adjustment for precise control. Standard 8 inch (203 mm) drum width and 5/8 inch (16 mm) maximum cutting depth. An industry standard 3 inch (76 mm) diameter dust collection port is provided for use with appropriate industrial type, dust control systems. Includes one drum, less flail kit.

LEGACY SERIES GRINDERS

SG12E LEGACY SERIES ELECTRIC SINGLE HEAD SURFACE GRINDER

The SG12E Legacy Series Surface Grinder was designed for use by both seasoned contractors and DIY homeowners, alike. And, unlike many similar sized machines, it operates from and readily available 15 ampere, 115 VAC, single phase power source that can be found on almost every jobsite. The operator handle quickly folds making it easier to transport in today’s smaller SUV vehicles. Handle height is also adjustable to better reduce operator back strain. The exclusive QUIK- STOP™ motor switch stops the unit when the handle grip is released to enhance operator safety and control. A 37 foot extension cord complete with integral GFI is provided as a standard accessory to help address less than favorable jobsite conditions. The SG12E accommodates a wide range of industry-standard, interchangeable attachments including Legacy Series grinding stones, scarifiers, the SCRAPE-R-TACH™ Coatings Removal System, the DIAM-A-TACH™ Diamond Grinding System and Pro Polish™ Concrete Floor Polishing System for unmatched versatility and productivity.

SG24E LEGACY SERIES ELECTRIC DUAL HEAD SURFACE GRINDER

The SG24 Legacy Series Surface Grinders were designed for targeted usage by contractors and homeowners alike for those job applications where additional capacity and productivity are required. Available with electric, gasoline and propane power source options. Designed for breaking up deposits of grease, dirt, rubber carpet backing and industrial residues from floors; cleaning concrete, asphalt and tiles; producting exposed, decorative slabs along with a wide range of general concrete grinding job applications. The dual, counter -rotating, multi-accessory discs balance forces to help reduce operator fatigue and enhance machine control. The SG24 Series accommodate a wide range of industry- standard, interchangeable attachments including Legacy Series grinding stones, scarifiers, the SCRAPE-R – TACH ™ Coatings Removal System, the DIAM-A-TACH™ Diamond Grinding System and Pro Polish ™ Concrete Floor Polishing System for unmatched versatility and productivity.

Manufacturer Sales Agency...

Quality Products for, Quality Customers from, Quality Manufacturers...